View source for Component video

'''Component video''' is a type of analog video information that is transmitted or stored as two or more separate signals.  Component video can be contrasted with ''[[composite video|composite]]'' video (such as [[NTSC]] or [[PAL]]) in which all the video information is combined into a single signal such as a TV broadcast. However, component video cables are gradually being replaced by the higher quality DVI and HDMI cables.

==Analog component video==
Analog video signals (also called components) must provide red, green and blue signals to create a television image.  The simplest type, RGB, consists of the three discrete red, green and blue signals sent down three coaxial cables.  There are a number of variant schemes which vary according to how synchronization is handled. If a synchronisation signal sent on the green channel, it is called sync-on-green. Some schemes use a separate sync channel, for instance the European [[SCART]] connection scheme in which the video signal occupies four (R,G,B + sync) of the 21 pins in the interface.   SVGA, another RGB scheme, is used worldwide for computer monitors (this is somethimes known as RGBHV, as the horizontal and vertical synchronisation pulses are sent on separate lines).

An alternative type of componentization does not use R,G,B components but rather a colorless component, termed luminance combined with one or more color-carrying components, termed chrominance, that give only color information.  Mulitiple chrominance channels allow for more precision and speed in mapping the RGB color space. This componentization scheme is a linear transformatio] of the sRGB color space.  This type of signal is usually what is intended when people talk of '''component video''' today. Variants of this format include YUV, YCbCr, YPbPr and YIQ commonly used in video systems.

In component video systems, additional synchronization signals may need to be sent along with the images. The synchronization signals are commonly transmitted on one or two separate wires, or embedded in the blanking period of one or all of the components. In computing, the common standard is for two extra wires to carry the horizontal and vertical components ('separate syncs'), whereas in video applications it is more usual to embed the sync signal in the Y component ('sync on luminance').

[[S-Video]] is another type of component video signal, because the luminance and chrominance signals are transmitted on separate wires. This connection type, however, cannot produce high definition or digital-quality pictures (pictures with more than 480 interlaced lines of video for NTSC or more than 576 lines of interlaced video for PAL). Component video is capable of producing signals such as 480p, 720p, 1080i and 1080p, but digital connections such as DVI (video only) and HDMI (which can also include up to 8 channels of audio) give better results at the higher resolutions (up to 1080p). 

Examples of international component video standards are:
*RS-170 RGB (525 lines, based on [[NTSC]] timings, now EIA/TIA-343)
*RS-343 RGB (525, 625 or 875 lines)
*STANAG 3350 Analogue Video Standard (NATO military version of RS-343 RGB)

==Digital component video==
Component digital video signals are sometimes referred to as 4:2:2, meaning that for every 4 (the first value of '4') bits that are dedicated to the Y component, 2 bits (the middle value of '2') are dedicated to the U & V components, and it is on both even and odd lines (the last value of '2') of the image.  The luminance or Y channel carries most of the image detail resolveable by the human eye, and is, therefore, assigned more bits. Another common method, 4:2:0, is used on DVDs. In this case, only the even lines have color information; for the odd lines it is approximated by interpolation. This signal is often converted to 4:2:2 inside the player before it is sent out to other devices.

==External links==
*[http://www.epanorama.net/documents/video/rs170.html RS-170 video signal (and related)]

[[Category:Television information]]